Port Security with mac address

Discussion in 'Cisco' started by Michael, May 14, 2004.

  1. Michael

    Michael Guest

    hallo,
    how can i configure a switch 2950 with a static mac address.That a
    defined Port only can be use by a PC with a defined mac address.
     
    Michael, May 14, 2004
    #1

    1. Advertisements

  2. Michael

    Johnny Routin Guest

    Have you checked Cisco's web site? This information is readily available
    there.


    JR
     
    Johnny Routin, May 14, 2004
    #2

    1. Advertisements

  3. Michael

    Peter Guest

    Hi Michael,
    Go to www.cisco.com and search on "2950 configure port security", and
    all will be revealed. That is public info.

    Cheers...........pk.
     
    Peter, May 14, 2004
    #3

    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Port Security on mac-address(es)

  2. Port-security mac address on 2950

  3. 2811 snmp for what mac's are on which port ( simliar to thesh mac-add )

  4. No MAC address on port with good traffic

  5. Syslog port to MAC address changes on a Catalyst 35xx?

  6. multiple mac-address on access port (with only one server connected)

  7. Cisco 1841 cannot be booted (due to port mac-address error??)

  8. Differnce between setting mac address port security under theinterface vs. the mac address-table glo

Loading...