Port Mirroring issue with cisco 2900 switch.

Discussion in 'Cisco' started by sodethman, Aug 4, 2006.

  1. sodethman

    sodethman Guest

    Currently I have this command set for the port that our
    Websence server is plugged into on a Cisco 2960 switch.

    monitor session 1 source vlan 1 - 3 , 80
    monitor session 1 destination interface Fa0/2 encapsulation replicate
    dot1q vlan 1

    With this commends the port monitors VLAN 1-3. We do not want to
    monitor VLAN
    because all of our servers including the Websence server is in it.
    When I take
    off VLAN 1 from the command the port doesn't work. Is there a way to
    VLAN 1 off monitoring and have Websence working on that port on VLAN 1?

    Thank you for your help guys...
    sodethman, Aug 4, 2006
    1. Advertisements

  2. Do you mean that you want just one switch port monitoring or are you
    wanting to monitor everything on that vlan?

    James Flockton, Aug 4, 2006
    1. Advertisements

  3. sodethman

    sodethman Guest

    I want to monitor every switch ports. With this command every
    switchport and vlan are being monitor correctly. We do not want it to
    monitor vlan 1. the problem is websense is on VLAN if we romove the
    VLAN 1 from the command the switchport that websence is on will no
    longer be on VLAN 1.

    Thank you.
    sodethman, Aug 7, 2006
  4. sodethman

    Merv Guest

    Have you tried placing the Websense server in it own separate VLAN
    (non VLAN 1) ?
    Merv, Aug 7, 2006
  5. sodethman

    sodethman Guest

    Thanks for your respond. I did that and it worked greate. I place
    Websence on it's own VLAN. This way I can take VLAN 1 from being
    monitor to.
    sodethman, Aug 7, 2006
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.