Point to Point Clear Channel DS3 - Clock Source Question

Discussion in 'Cisco' started by Evolution, Jul 19, 2006.

  1. Evolution

    Evolution Guest

    Do I need "Clock Source Internal" on one router, and "Clock Source
    Line" on the other router...for a Point to Point DS3???

    thanks,
    rws
     
    Evolution, Jul 19, 2006
    #1
    1. Advertisements

  2. Evolution

    Guest

    Evolution wrote:
    > Do I need "Clock Source Internal" on one router, and "Clock Source
    > Line" on the other router...for a Point to Point DS3???


    ~Not usually.

    If you had a crossover cable directly connecting the two routers
    then such a configuration would be appropriate however on
    a real WAN the link provider invariably (in my experience)
    provides the clocking.

    "Clock source line"
     
    , Jul 20, 2006
    #2
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.