PIX static command format and this scenario

Discussion in 'Cisco' started by zillah, Dec 27, 2006.

  1. zillah

    zillah

    Joined:
    Mar 23, 2006
    Messages:
    44
    Likes Received:
    0
    Code:
    static (dmz,inside) 192.168.2.10 192.168.101.210 dns netmask 255.255.255.255 0 0
    static (dmz,inside) 192.168.2.11 192.168.101.211 dns netmask 255.255.255.255 0 0
    
    As far as know that the format for pix static command is :

    static (highSecurity, lowSecurity) lowip highip

    but in the configuration that I have got in the quote above (we have got different format)!!!Any clue ?

    Edited: I found the solution
    http://www.cisco.com/en/US/products...s_configuration_example09186a008046f31a.shtml
     
    Last edited: Dec 27, 2006
    zillah, Dec 27, 2006
    #1
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.