Pix site 2 site VPN on same subnet

Discussion in 'Cisco' started by quartzq, Jul 27, 2007.

  1. quartzq

    quartzq

    Joined:
    Jul 27, 2007
    Messages:
    1
    Likes Received:
    0
    Hi,

    I have a problem connecting 2 cisco pix 506e over a VPN . The problem is that the public IP address for the both 506 are in the same subnet.
    for an example

    site a:
    private 10.10.1.0/255.255.255.0
    public 88.220.195.130 / 255.255.255.248
    gateway 88.220.195.129

    site b:
    private 10.10.2.0/255.255.255.0
    public 88.220.195.138 / 255.255.255.248
    gateway 88.220.195.137

    I hope someone can give me a push into the right direction.
     
    quartzq, Jul 27, 2007
    #1

    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Two PIX on same subnet with same gateway?

  2. site to site on same subnet

  3. PIX 501 :VPN client traffic does not pass down VPN tunnel to remote subnet..

  4. pix, site-to-site vpn,the same ip class

  5. PIX 515 - can Use VPN300 Client and PIX-to-PIX VPN at the same time?

  6. PIX 506 - Can inside and outside interface be on same subnet?

  7. VPN site to site & Remote access VPN ( vpn client) over the same interface

  8. Changed Inside IP subnet on PIX 501, cant VPN to PIX 515

Loading...