Pix route multiple subnets inside interface

Discussion in 'Cisco' started by Foszz, May 28, 2009.

  1. Foszz


    May 28, 2009
    Likes Received:
    Hi All-
    I have a Pix 501 with multiple subnets (and a 1700 router) behind it. The network running between the pix and the 1700 is MASK There are several subnets behind the 1700 192.168.x.x. I used the command "nat inside 1" on the firewall, and set up the routes, but can only access the internet from the network, and not from behind the 1700. I believe the 1700 is set up correctly, because I can access the PDM on the 501 from (or at the very least the routes are correct on the 1700, it has no ACL). Can anyone offer assistance on this? Thanks in advance.
    Foszz, May 28, 2009
    1. Advertisements

  2. Foszz


    May 28, 2009
    Likes Received:
    More Info on problem-

    I thought I would add a "sanitized" config for any of you who can help. Thanks for your assistance.

    PIX Version 6.3(5)
    interface ethernet0 auto
    interface ethernet1 100full
    nameif ethernet0 outside security0
    nameif ethernet1 inside security100
    enable password xxx encrypted
    passwd xxx encrypted
    hostname xxx
    domain-name xxx
    clock timezone CST -6
    fixup protocol dns maximum-length 512
    fixup protocol ftp 21
    fixup protocol h323 h225 1720
    fixup protocol h323 ras 1718-1719
    fixup protocol http 80
    fixup protocol rsh 514
    fixup protocol rtsp 554
    fixup protocol sip 5060
    fixup protocol sip udp 5060
    fixup protocol skinny 2000
    fixup protocol smtp 25
    fixup protocol sqlnet 1521
    fixup protocol tftp 69
    pager lines 24
    mtu outside 1500
    mtu inside 1500
    ip address outside 66.xxx.xxx.250
    ip address inside
    ip audit info action alarm
    ip audit attack action alarm
    pdm location inside
    pdm history enable
    arp timeout 14400
    global (outside) 1 interface
    nat (inside) 1 0 0
    route outside 66.xxx.xxx.241 1
    route inside 1
    timeout xlate 3:00:00
    timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225 1:00:00
    timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00
    timeout sip-disconnect 0:02:00 sip-invite 0:03:00
    timeout uauth 0:05:00 absolute
    aaa-server TACACS+ protocol tacacs+
    aaa-server TACACS+ max-failed-attempts 3
    aaa-server TACACS+ deadtime 10
    aaa-server RADIUS protocol radius
    aaa-server RADIUS max-failed-attempts 3
    aaa-server RADIUS deadtime 10
    aaa-server LOCAL protocol local
    ntp server source inside
    http server enable
    http inside
    no snmp-server location
    no snmp-server contact
    snmp-server community public
    no snmp-server enable traps
    floodguard enable
    telnet timeout 5
    ssh timeout 5
    console timeout 0
    terminal width 80
    Foszz, May 29, 2009
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.