PIX not allowing all lan clients through VPN tunnel

Discussion in 'Cisco' started by paul_tomlin, Nov 16, 2005.

  1. paul_tomlin

    paul_tomlin Guest

    we've got a PIX 501 connecting back to a PIX 515, this has all been
    working for some time, now though it appears the last person in the
    remote site (501) can't use the VPN tunnel back to the 515, they can
    access all resources on their local network, unfortunately the PIX
    ACL's are configured not to allow direct internet access so i can't
    prove whether it's the 501 not allowing traffic out from it or the 515
    not allowing traffic in.

    is there a maximum number of clients the 501 will support through a VPN
    tunnel?

    Hope you guys can help

    Paul
     
    paul_tomlin, Nov 16, 2005
    #1

    1. Advertisements

  2. paul_tomlin

    paul_tomlin Guest

    Found the problem - it's limited to 10 inside hosts!
     
    paul_tomlin, Nov 16, 2005
    #2

    1. Advertisements

  3. paul_tomlin

    ESM Guest

    PIX 501's come in 10, 50, and unlimited licenses.

    FYI, It's cheaper to buy a 50 users or an unlimited then have to upgrade
    10 -> 50 or 50 -> unlimited.
     
    ESM, Nov 18, 2005
    #3

    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Lan-to-LAN tunnel (IOS - VPN 3000) ICMP problem

  2. Spilt DNS trough IP VPN LAN-2-LAN tunnel

  3. Split Tunnel Blocks http through tunnel but passes http around tunnel

  4. How to configure LAN-to-LAN VPN tunnel with overlapping network

  5. *some* return traffic not going through vpn tunnel (although not all)

  6. solution to "*some* return traffic not going through vpn tunnel (although not all)"

  7. site-to-site VPN tunnel with remote VPN clients

  8. PIX & VPN Concentrator LAN-to-LAN Tunnel Disconnected

Loading...