PIX giving static ip's to PPTP clients

Discussion in 'Cisco' started by John Smith, Oct 22, 2004.

  1. John Smith

    John Smith Guest

    G'day,

    Is it possible to configure PIX 506E as a PPTP server which would provider
    pptp clients with static ip addresses based on username?

    cheers
     
    John Smith, Oct 22, 2004
    #1
    1. Advertisements

  2. :Is it possible to configure PIX 506E as a PPTP server which would provider
    :pptp clients with static ip addresses based on username?

    Not directly. It -might- be possible by using a RADIUS or TACACS+
    server, but I suspect not.
     
    Walter Roberson, Oct 22, 2004
    #2
    1. Advertisements

  3. John Smith

    Tosh Guest

    Not directly. It -might- be possible by using a RADIUS or TACACS+
    Or, if you have very few users, you can create a vpdn group for each of them
    and assign to them pools of 1 address only, not sure if there are version
    issues, with 6.3(3) it should work.
    However, with more than a few users this is a nightmare.
    Bye,
    Tosh.
     
    Tosh, Oct 22, 2004
    #3
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.