PIX 8.0 and ASDM - not enough flash space

Discussion in 'Cisco' started by Lutz Donnerhacke, Aug 27, 2007.

  1. A customer's PIX 525 was upgraded to 8.0(2), because the customer needs IPv6
    with multiple contexts (and the failover option). Unfortunly the ADSM for
    the customers self-managed context can not be stored on the Flash anymore:

    # sh ver
    [...]
    Hardware: PIX-525, 128 MB RAM, CPU Pentium III 600 MHz
    Flash E28F128J3 @ 0xfff00000, 16MB
    BIOS Flash AM29F400B @ 0xfffd8000, 32KB


    # dir
    [...]
    5 -rw- 7188480 17:41:21 Aug 24 2007 pix802.bin
    7 -rw- 14xxxx 09:00:03 Aug 25 2007 old_running.cfg
    11 -rw- 14xxxx 09:19:21 Aug 27 2007 admin.cfg
    14 -rw- 12xx 09:53:34 Aug 25 2007 intern.cfg
    [...]
    16128000 bytes total (8639488 bytes free)

    The ASDM is 5919340 bytes, but

    # cop tftp://217.17.x.y/asdm-502.bin flash:
    Accessing
    tftp://217.17.x.y/asdm-502.bin...!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
    %Error copying tftp://217.17.x.y/asdm-502.bin (Not enough space on device)

    What can I do?

    A "squeeze" Command does not longer exists.
     
    Lutz Donnerhacke, Aug 27, 2007
    #1
    1. Advertisements

  2. Lutz Donnerhacke

    allan16

    Joined:
    Aug 24, 2007
    Messages:
    14
    Likes Received:
    0
    Can you post a "show flash" output to see what files are currently stored on flash?
    Just as an FYI, asdm-502 are for 7.2 versions, you need the asdm-602.bin file.
     
    allan16, Aug 27, 2007
    #2
    1. Advertisements

  3. Lutz Donnerhacke

    vermjoske Guest

    hi Lutz,

    First of all please note that for PIX 8.0.2 you need ASDM 6.0.2, not
    5.0.2.

    6.0.2 is bigger so you will probably still have the same problem, I
    would suggest trying "fsck flash:", if that doesn't help "format
    flash:" (this will erase all your files, obviously).
    Or open a TAC case if you can, looks like it might be CSCsc30079 (not
    fixed yet).

    Joske
     
    vermjoske, Aug 28, 2007
    #3
  4. *Argl* Of course.
    Does not help. Problem persists.
    Yep, that's the next try. But I'll not do this without a competent partner
    near by the system if the power fails exactly in this minute. Murphy is
    everywhere.
    Thank you.
     
    Lutz Donnerhacke, Aug 28, 2007
    #4
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.