PIX 515E 7.01 static route in the same interface

Discussion in 'Cisco' started by opsvlc, May 16, 2006.

  1. opsvlc

    opsvlc Guest

    Hope anyone can help me with this little problem:

    I've got a pix 515e with 7.01 release. I made a static route pointing
    to the inside interface; so im pinging a host and then ive got a static
    route returning to the same interface. For example; my ip addresss is
    10.10.80.113/16 trying to ping x.x.x.x. in my PIX (10.10.50.1/16 in the
    inside interface) ive got a static route like this:

    route inside x.x.x.x. 255.255.255.255 10.10.60.200/16

    I think this wasnt possible with a release prior to 7.

    what im doing wrong?

    thank you
     
    opsvlc, May 16, 2006
    #1
    1. Advertisements

  2. It is still not possible with 7.x. With 7.x you can route between different
    interfaces of the same security level and between VPN clients on the same
    interface. You still can't use the pix as an router on the stick. You have
    to use vlans at least.
     
    Lutz Donnerhacke, May 16, 2006
    #2
    1. Advertisements

  3. opsvlc

    opsvlc Guest

    thanks! gonna play with vlans :)
     
    opsvlc, May 16, 2006
    #3
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.