Pix 515 checksum error after update

Discussion in 'Cisco' started by Jan Slusarczyk, Oct 13, 2005.

  1. I have a serious problem with Pix 515 UR. I have upgraded the system to
    6.3.5 and the Pix didn't boot after reload. The monitor shows the
    following error:

    imgsum_config: sumval(0xe5be) md5(0x95937073 0x75b817db 0x54d7811a
    0xba7d0214)
    imgsum_verify: chksum(0x 0) md5(0x09e1b9df 0xc9f06c06 0x12e9f5df
    0xdf89f7cb)
    Panic: kernel - The checksum verification for this image failed.

    I can't upload any image newer than 6.0.1. 5.2.3 and 6.0.1 work OK until
    restart. After reloading the unit I get the same checksum error. What's
    strange is than chksum is always shown as (0x 0). I've had erased the
    flashfs with erasedisk622.bin and it didn't help.

    Any help will be very appreciated.
    Regards
    Jan
     
    Jan Slusarczyk, Oct 13, 2005
    #1
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.