Pix 506 crc errors

Discussion in 'Cisco' started by pasmore26, Feb 15, 2005.

  1. pasmore26

    pasmore26 Guest

    Hi,
    I have a pix 506 that's giving me crc and input errors (an avg of 50
    errors/hour) It keeps rebooting itself every 24 hrs. I have put in a
    new pix, changed the cabling(crossover cables to a switch), change the
    speed from half duplex to full and at one point auto. Placed a hub then
    a switch in between. Swapped the cables between the inside and outside
    interfaces. I have also checked the crypto map and management access
    inside as well as making sure the sysopt command is in place. Nothing
    indicates why we see intermittent crashes. Nothing has changed
    configuration wise.I have thrown everthing at this and am at a loss.

    Any suggestions?


    --Sydonna
     
    pasmore26, Feb 15, 2005
    #1
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.