Pix 501 VPN to Symantec Enterprise Firewall 7.04 Tunnel Mode

Discussion in 'Cisco' started by Mathias Herbst, Oct 16, 2003.

  1. Mathias Herbst

    Mathias Herbst Guest

    Hello,

    at this time I should create a vpn-tunnel with a Pix 501 with dynamic
    ip-address (ADSL-connection) to a Symantec Enterprise Firewall 7.04. IKE
    Phase 1 are working (no error messages), the IKE SA are in state qm_idle,
    but on ipsec VPN's are only errors.

    Has anyone a configuration sample (pix 501) for this situation?

    Thanks a lot ...

    Mathias
     
    Mathias Herbst, Oct 16, 2003
    #1

    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Cant establish a VPN tunnel between PIX 501 and Cisco VPN Client

  2. Split Tunnel Blocks http through tunnel but passes http around tunnel

  3. PIX 501 :VPN client traffic does not pass down VPN tunnel to remote subnet..

  4. Can't get VPN-tunnel to work - PIX 501

  5. Help With 1710 to Pix 501 VPN Tunnel

  6. Help creating a VPN Tunnel - Pix 501 1710 Router

  7. connecting a Nortel Contivity VPN device to a Cisco PIX Firewall in IPSEC tunnel mode

  8. Tunnel between PIX 501 and CheckPoint firewall

Loading...