PIX 501 Site-to-Site VPN and Remote Access VPN

Discussion in 'Cisco' started by drhopkins, Nov 14, 2006.

  1. drhopkins

    drhopkins Guest

    We have a PIX 501 at our main office currently providing remote access
    to mobile users. We would like to set up 2, small remote offices with
    site-to-site VPN connectivity to the main office. We are planning on
    putting 851 routers at each remote office.
    Is it possible to establish 2 site-to-site VPNs and continue allowing
    remote access to individual VPN clients simultaneously with a PIX 501?
    Thank you for any suggestions or advice, Dave.
     
    drhopkins, Nov 14, 2006
    #1

    1. Advertisements

  2. drhopkins

    Walter Roberson Guest

    Yes, not a problem at all.

    However, if you want the VPN clients to be able to access the remote
    offices, you will encounter configuration difficulties.
     
    Walter Roberson, Nov 14, 2006
    #2

    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. PIX - Site-to-Site VPN and VPN Client access

  2. PIX 501 VPN servers and VPN site to site - possible?

  3. PIX 501 and 506 lossing VPN connection to remote site after timeout

  4. PIX 501 -- site to site and remote user VPNs

  5. Site to Site VPN problems between PIX 501 and PIX 515

  6. 515e PIX to 501 PIX - site to site vpn

  7. VPN site to site & Remote access VPN ( vpn client) over the same interface

  8. Trying to access the PDM of a Cisco pix over a Remote Access VPN withCisco VPN Client

Loading...