pix 501 configuration with charter communications

Discussion in 'General Computer Support' started by seanlee, Aug 24, 2006.

  1. seanlee


    Aug 24, 2006
    Likes Received:
    I have a problem with my pix configuration with charter internet.

    i am able to grab an IP from charter for my outside interface and also able to ping IPs on the internet. my desktop is able to get an IP from the PIX for i have my dhcp server setup on the pix but the desktop is not able to get out to the internet. i think it's something to do with my global outside configuration. I'm only able to get one IP from charter and that's used by the outside interface. my configuration is pasted below. please help.

    PIX Version 6.2(2)
    nameif ethernet0 outside security0
    nameif ethernet1 inside security100
    enable password N7FecZuSHJlVZC2P encrypted
    passwd 2KFQnbNIdI.2KYOU encrypted
    hostname SenPIX
    fixup protocol ftp 21
    fixup protocol http 80
    fixup protocol h323 h225 1720
    fixup protocol h323 ras 1718-1719
    fixup protocol ils 389
    fixup protocol rsh 514
    fixup protocol rtsp 554
    fixup protocol smtp 25
    fixup protocol sqlnet 1521
    fixup protocol sip 5060
    fixup protocol skinny 2000
    access-list 100 permit icmp any any echo
    access-list 100 permit icmp any any time-exceeded
    access-list 100 permit icmp any any unreachable
    pager lines 24
    mtu outside 1500
    mtu inside 1500
    ip address outside dhcp
    ip address inside
    ip audit info action alarm
    ip audit attack action alarm
    pdm history enable
    arp timeout 14400
    nat (inside) 1 0 0
    access-group 100 in interface outside
    route outside 1
    timeout xlate 3:00:00
    timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h323 0:05:00 si
    p 0:30:00 sip_media 0:02:00
    timeout uauth 0:05:00 absolute
    aaa-server TACACS+ protocol tacacs+
    aaa-server RADIUS protocol radius
    aaa-server LOCAL protocol local
    no snmp-server location
    no snmp-server contact
    snmp-server community public
    no snmp-server enable traps
    floodguard enable
    no sysopt route dnat
    telnet timeout 5
    ssh timeout 5
    dhcpd address inside
    dhcpd dns
    dhcpd lease 28800
    dhcpd ping_timeout 750
    dhcpd enable inside
    terminal width 80
    : end
    seanlee, Aug 24, 2006
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.