PC to PC: on-off-on-off etc.

Discussion in 'Wireless Networking' started by Guest, Jun 7, 2006.

  1. Guest

    Guest Guest

    2 PC's, P4's, both MSXPpro, SP2.
    Linked via LAN plug and cable to hub.
    The Host PC was for repair and they had tochange the MB, but managed to load
    also some settings from the setup with the unserviceable MB. One can look
    from the host-PC into shared drives in the client PC.
    Put whilst both PC are on, suddenly from the LAN icon is a message "a LAN
    coble is unplugged" and after 2-5 seconds, the "PC1 is connected". And that
    repeats quite frequently.
    Must I de-install all sharing and remove LAN cables and start afresh or is
    there a shorter route?
    Is ist a must to map network drives? Because thos are not mapped on neither
    PC.
    Greatful for any help.
    Regards
    nopfusch
     
    Guest, Jun 7, 2006
    #1
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.