Passing DHCP through a wireless AP (Cisco Aironet)

Discussion in 'Computer Support' started by Jack B. Pollack, Nov 14, 2003.

  1. Jack B. Pollack

    Jack B. Pollack Guest

    I have a Cisco Aironet 1100 wireless access point. I have given it a fixed
    IP address (Network Interface - IP Addresses - Static IP).

    Some of my wireless computers require fixed IP's for ports that are being
    forwarded to them. Other wireless PC can/do have dynamic IP's.

    Problem is that the AP is not broadcasting the DHCP from the router.

    Anyone know in general, or specifically for this AP if there is a setting,
    or service that I have to enable so that SOME of the wireless PCs can use &
    see the DHCP server through the AP (I want the AP to still have a static
    address)?

    Thanks
     
    Jack B. Pollack, Nov 14, 2003
    #1

    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Wireless DHCP clients cannot obtain an IP address from the DHCP se

  2. ESP problem with MS RRAS to Cisco 3000 VPN passing through PIX 515E Firewall.

  3. Aironet 1200 and Aironet 1300 compatible?

  4. Cisco VPN Client v 4.6 and Cisco Aironet Wireless Adapter

  5. Cisco VPN client not passing data through PIX 501

  6. Need help setting up a wireless DHCP behind a wired non-DHCP network?

  7. Wireless clients can't get DHCP address from router behind Aironet 1100

  8. 1131AG passing through DHCP request (radius) no idea

Loading...