Open ports/IPs

Discussion in 'Windows 64bit' started by Guest, May 25, 2006.

  1. Guest

    Guest Guest

    I'm trying to Login to an AP that requires ports 20011,20012,40001 and IP's
    210.202.101.201,211.20.1.6,211.22.118.26,61.218.61.34,211.23.3.138 open.
    My OS is Windows XP Professional x64 Edition.
    How do I do it?
    Thanks,
    Stanjb
     
    Guest, May 25, 2006
    #1

    1. Advertisements

  2. Guest

    Charlie Russel - MVP Guest

    Open the Windows Firewall applet in the control panel and click on
    Exceptions, click on Add Port, and go through the steps of adding the ports.
    This is, btw, not really a 64-bit question, since the behaviour is identical
    in 32-bit XP SP2. But that's OK, you're always welcome here.

    Charlie.
     
    Charlie Russel - MVP, May 25, 2006
    #2

    1. Advertisements

  3. Guest

    Guest Guest

     
    Guest, May 25, 2006
    #3
  4. Guest

    Guest Guest

    It worked.Thank you Charlie
    Stanj

     
    Guest, May 25, 2006
    #4

    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. which ports to open for a Windows VPN

  2. Linksys wifi router - config for minimum open ports

  3. Throttling specific IPs & Ports

  4. how to open ports for mail server on a 2621 router

  5. Ports to open to the firewall (Hide Nat, Cisco VPN)

  6. Open free news server news.ips.pt

  7. Recommendations Please for a PCI card w/ two USB 2 Ports and FireWaire Ports

  8. HSRP: virtual IPs without real IPs?

Loading...