no output from any show command

Discussion in 'Cisco' started by Akram Allani, Aug 4, 2004.

  1. Akram Allani

    Akram Allani Guest


    I have a cisco 2500 series with ios version 11.3 and 4Mb RAM
    this router has 2 access one LL and one X25 access

    When I connect to this router through the LL I have no problem. But
    when I connect through the X25 access by a "telnet <IP address>" and I
    type a "show runn" or "sh int" or any show <sub command> the output is
    locked with no character from the show command. But when using "pad
    <X121 address>" through the X25 access all is OK.

    Thanks for any response.
    Akram Allani, Aug 4, 2004
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.