No display showing

Discussion in 'Hardware' started by broodcaladan, Nov 19, 2006.

  1. broodcaladan

    broodcaladan

    Joined:
    Nov 19, 2006
    Messages:
    1
    Likes Received:
    0
    I went too plug mic in back of computer. I pushed the computer forward a couple inches and the front stand of the box went over edge of table and the computer dropped slightly. Bout 2cms.

    The display on the monitor then went off. Says there is no signal. Called friend on phone and i was still on msn. When he sent me a msg I could hear the sound msn makes.

    I reset computer. Still no picture, but computer seemingly loaded up fine, and auto signed into msn as usual.

    I have tried 3 different methods of connecting the video card too the monitor, same deal. Monitor works fine as I use another computer on it. I have tried too also use the second PCI-E port and still no use.

    I don't have access too a spare card, or a computer with a pci-e slot too test the card.

    Was wondering if there was something i missed, or if that little bumped is likely too have damaged the card or motherboard ?
     
    broodcaladan, Nov 19, 2006
    #1
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.