NM fails in cisco 3640

Discussion in 'Cisco' started by htnet, Jan 20, 2004.

  1. htnet

    htnet Guest

    Hello,

    when I insert NM-2FE2W module in cisco 3640 I get the following message on
    the console screen:

    *Mar 1 00:00:07.243: %FECPM-3-TDMSW: TDM switch init in slot 2 failed
    -Traceback= 602430B0 6023D5E4 60591178 60591268 604F160C 60404228 6040443C
    604D91F0 604D91D4
    *Mar 1 00:00:07.247: %FECPM-1-INITFAIL: NM slot 2: PCI dev 8 init failed
    *Mar 1 00:00:07.335: %FECPM-1-DISCOVER: NM slot 2: only 2 PCI dev found

    My IOS version is: c3640-i-mz.123-4.T2.bin" . I tried to power off, insert
    the module again in different slot, but it didn't help.
    Can anyone help me with this problem?

    Nice regards,
    Ivana
     
    htnet, Jan 20, 2004
    #1
    1. Advertisements

  2. htnet

    Hansang Bae Guest

    Are you sure your version of IOS supports the NM? Does "show diag" tell
    you anything that might help?



    --

    hsb

    "Somehow I imagined this experience would be more rewarding" Calvin
    *************** USE ROT13 TO SEE MY EMAIL ADDRESS ****************
    ********************************************************************
    Due to the volume of email that I receive, I may not not be able to
    reply to emails sent to my account. Please post a followup instead.
    ********************************************************************
     
    Hansang Bae, Jan 21, 2004
    #2
    1. Advertisements

  3. htnet

    Ivana Guest

    It was the wrong IOS version. Thanks for help!
     
    Ivana, Jan 21, 2004
    #3
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.