Newbie question about 1721 router with 2 WIC-2T

Discussion in 'Cisco' started by ZP, May 13, 2006.

  1. ZP

    ZP Guest

    I need to connect 2 leased lines (2-wire each) from 2 different telcos to my office.
    The interfaces are both V.35

    Can I use one Cisco 1721 router with one WIC-2T for the above configuration?
    Can one WIC-2T connect 2 differnt leased lines at the same time?
    Can the 1721 route data from 2 sources to/from the inbuilt Ether NIC?

    I am on limited budget and don't know much about Cisco gears.

    Thanks,
    ZP
     
    ZP, May 13, 2006
    #1
    1. Advertisements

  2. Yes^3

    Should work fine. Just need to get the right cabling and away you go.
     
    Doug McIntyre, May 13, 2006
    #2
    1. Advertisements

  3. ZP

    ttrotter01 Guest

    You will need a CAB-SS-V35MT to connect your WIC and CSU/DSU.
     
    ttrotter01, May 14, 2006
    #3
  4. ZP

    ZP Guest

    Thanks for you replies.

    ZP
     
    ZP, May 15, 2006
    #4
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.