newbie - pix 520/ios 6.3(4) static routing problem

Discussion in 'Cisco' started by vrankom, Nov 17, 2006.

  1. vrankom

    vrankom Guest

    I have this simple problem:
    I want to set static routing between networks: (net A) (net B)

    PIX: IF1 - (conected to router in net A)
    IF2 - (conected to router in net B)

    I have router set up in net A with static route to via
    And another router in net B with static route to via

    on PIX I set up static route IF1 1
    IF2 1

    I can ping net A and net B from PIX

    but I cant ping net B from net A

    I set up the same config on my test linux machine and everything
    Can you please tell me what I am missing on my PIX ?

    thnx in advance

    vrankom, Nov 17, 2006
    1. Advertisements

  2. static and conduitaccess-list
    Lutz Donnerhacke, Nov 17, 2006
    1. Advertisements

  3. vrankom

    vrankom Guest

    static and conduitaccess-list
    how can I set this up?
    I have checked all options in PDM (3.0) and couldnt find ACL anywhere

    Im new to the PIX please excuse my ignorance

    vrankom, Nov 17, 2006
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.