Netgear wireless adaptor problem !!

Discussion in 'Computer Support' started by JIm, May 28, 2004.

  1. JIm

    JIm Guest

    Can anyone advise please.

    After deciding that a netgear wireless network wasn't reliable enough i
    uninstalled the software and removed all hardware.
    Now i'm using cat 5e but i have one slight problem

    On assigning a manual IP address for each computer i recieve
    an error that the IP address is already assigned to
    the adaptor Netgear Wg311V2 (The wireless card i used)
    This adaptor is hidden from the network connections folder
    because it is not phisically installed. (yes i removed it)
    if the same address is used a conflict will occur.

    I've checked that the software has been removed properly and
    cant see any other adaptors apart from the Rj45 Lan card

    Anyone know the crack here.

    JIm, May 28, 2004
    1. Advertisements

  2. JIm

    Hamman Guest

    Why not assign a different IP to the RJ45 connection? Its not like you have
    a shortage of unused ones.

    Hamman, May 28, 2004
    1. Advertisements

  3. JIm Guest

    this could be why your wireless network wasn't working correctly...

    check your device manager for unknown devices installed and uninstall them.

, May 28, 2004
  4. JIm

    mhicaoidh Guest

    Taking a moment's reflection, JIm mused:
    | Anyone know the crack here.

    You can reinstall the card, set it to a different IP (one not on your
    network), and then uninstall it again.
    mhicaoidh, Jun 3, 2004
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.