Nerd Vittles "Asteridex" Robodialler

Hello.

I'm having some trouble with the most recent article @
http://mundy.org/blog/index.php?p=83

In particular this bit of code:

[from-internal-custom]
exten => _00.,1,SayDigits(${EXTEN:2},) ; extensions dialed with 00 prefix
get looked up in AsteriDex
exten => _00.,2,EAGI(asteridex.agi|${EXTEN})
exten => _00.,3,GotoIf($["${DIAL:0:2}" = "00?]?97)
exten => _00.,4,NoOp(Number to Dial: ${DIAL})
exten => _00.,5,NoOp(Person to Dial: ${DUDE})
exten => _00.,6,AGI(festival-script.pl|Connecting to: ${DUDE}. One moment
please.)
exten => _00.,7,Dial(IAX2/${DIAL}@sipdiscount,90,r)
exten => _00.,8,Hangup()
exten => _00.,97,Playback(num-not-in-db)
exten => _00.,98,Playback(goodbye)
exten => _00.,99,Hangup()

The article was written with [email protected] 1.5 in mind, I'm using v1.3.

I've got the webdialler (click to dial) all functioning properly, so I know
the numbers are stored in the database correctly, however with this part of
the application, I should be able to dial a short code, preceeded with 00 to
dial a contact.

Unfortunately, line 7 above seems to fail. When I dial one of the speed dial
codes, I hear two or three ringing tones, followed by a continuous tone and
the call never connects.

 

Hi
what do you get on the * cli when the call fails ? Oh and I thought
sipiscount was sip not iax.

Ian

 

Ian" <spam"AT wrote:
|| ||| Hello.
|||
||| I'm having some trouble with the most recent article @
||| http://mundy.org/blog/index.php?p=83
|||
||| In particular this bit of code:
|||
||| [from-internal-custom]
||| exten => _00.,1,SayDigits(${EXTEN:2},) ; extensions dialed with 00
||| prefix get looked up in AsteriDex
||| exten => _00.,2,EAGI(asteridex.agi|${EXTEN})
||| exten => _00.,3,GotoIf($["${DIAL:0:2}" = "00?]?97)
||| exten => _00.,4,NoOp(Number to Dial: ${DIAL})
||| exten => _00.,5,NoOp(Person to Dial: ${DUDE})
||| exten => _00.,6,AGI(festival-script.pl|Connecting to: ${DUDE}. One
||| moment please.)
||| exten => _00.,7,Dial(IAX2/${DIAL}@sipdiscount,90,r)
||| exten => _00.,8,Hangup()
||| exten => _00.,97,Playback(num-not-in-db)
||| exten => _00.,98,Playback(goodbye)
||| exten => _00.,99,Hangup()
|||
||| The article was written with [email protected] 1.5 in mind, I'm using
||| v1.3.
|||
||| I've got the webdialler (click to dial) all functioning properly, so
||| I know the numbers are stored in the database correctly, however with
||| this part of the application, I should be able to dial a short code,
||| preceeded with 00 to dial a contact.
|||
||| Unfortunately, line 7 above seems to fail. When I dial one of the
||| speed dial codes, I hear two or three ringing tones, followed by a
||| continuous tone and the call never connects.
|||
|| Hi
|| what do you get on the * cli when the call fails ?

Good question. Do I just log in at the console by entering asterisk -r?


|| Oh and I thought sipiscount was sip not iax.
||

You would've thought so, given its name, however I couldn't get it to work
successfully over sip, so ended up using iax.voipbuster.com as the
host............

 

nearly "asterisk -vvvvvr" or asterisk -r then "set verbose 5"

fair enough