NEED INFO ON IPSec between PIX515 devices.

Discussion in 'Hardware' started by bhumikpatel, Oct 29, 2007.

  1. bhumikpatel

    bhumikpatel

    Joined:
    Oct 29, 2007
    Messages:
    1
    Likes Received:
    0
    Hi all,

    i have 2 pIX 515 devices at 2 different locations. Need to set up IPSec VPN between both. i found cisco article on how to do it. my question here is do i need a seperate public ip on both ends for the IPSec VPN or is it possible to share public IP. for example, currently i have 3 Public IPs on each end
    1 for External browsing and other 2 are NATed to internal resources.

    what approach should i take. any help is appreciated.
    thnkx
     
    bhumikpatel, Oct 29, 2007
    #1
    1. Advertisements

  2. bhumikpatel

    Greeley

    Joined:
    Dec 16, 2007
    Messages:
    67
    Likes Received:
    0
    You would set up the peers with the IP addresses assigned to the outside interfaces.
     
    Greeley, Dec 16, 2007
    #2
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.