Need help understanding throughput

Discussion in 'Cisco' started by srp336, Mar 8, 2006.

  1. srp336

    Merv Guest

    What IOS version is running on the 4700 and the 2621?

    Please post output of "show version"
     
    Merv, Mar 13, 2006
    #21
    1. Advertisements

  2. srp336

    Merv Guest

    What IOS version is running on the 4700 and the 2621?

    Please post output of "show version"
     
    Merv, Mar 13, 2006
    #22
    1. Advertisements

  3. srp336

    srp336 Guest

    OK... the 2621:

    Cisco Internetwork Operating System Software
    IOS (tm) C2600 Software (C2600-I-M), Version 12.1(5)T17, RELEASE
    SOFTWARE (fc1)
    TAC Support: http://www.cisco.com/tac
    Copyright (c) 1986-2004 by cisco Systems, Inc.
    Compiled Wed 14-Jan-04 03:53 by pwade
    Image text-base: 0x80008088, data-base: 0x80972DCC

    ROM: System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)

    usc_cincy uptime is 10 weeks, 5 days, 23 hours, 55 minutes
    System returned to ROM by power-on
    System image file is "flash:c2600-i-mz.121-5.T17.bin"
    Host configuration file is "tftp://198.81.218.6/list109n10"

    cisco 2621 (MPC860) processor (revision 0x101) with 41984K/7168K bytes
    of memory
    ..
    Processor board ID JAB033103PN (4030906891)
    M860 processor: part number 0, mask 49
    Bridging software.
    X.25 software, Version 3.0.0.
    2 FastEthernet/IEEE 802.3 interface(s)
    2 Serial network interface(s)
    32K bytes of non-volatile configuration memory.
    8192K bytes of processor board System flash (Read/Write)

    Configuration register is 0x922

    And the 4700:

    Cisco Internetwork Operating System Software
    IOS (tm) 4500 Software (C4500-D-M), Version 12.0(28), RELEASE SOFTWARE
    (fc2)
    Copyright (c) 1986-2004 by cisco Systems, Inc.
    Compiled Wed 14-Jan-04 03:24 by nmasa
    Image text-base: 0x60008930, data-base: 0x60806000

    ROM: System Bootstrap, Version 5.2(7b) [mkamson 7b], RELEASE SOFTWARE
    (fc1)
    BOOTFLASH: 4500 Bootstrap Software (C4500-BOOT-M), Version 10.3(7),
    RELEASE SOFT
    WARE (fc1)

    Michoacan uptime is 1 year, 46 weeks, 4 days, 18 hours, 20 minutes
    System restarted by reload at 22:19:20 UTC Wed Apr 21 2004
    System image file is "flash:c4500-d-mz.120-28.bin"
    Host configuration file is "tftp://198.81.218.6/switchon"

    cisco 4700 (R4K) processor (revision B) with 32768K/16384K bytes of
    memory.
    Processor board ID 03105376
    R4600 processor, Implementation 32, Revision 2.0 (512KB Level 2 Cache)
    G.703/E1 software, Version 1.0.
    Bridging software.
    X.25 software, Version 3.0.0.
    6 Ethernet/IEEE 802.3 interface(s)
    8 Serial network interface(s)
    128K bytes of non-volatile configuration memory.
    8192K bytes of processor board System flash (Read/Write)
    4096K bytes of processor board Boot flash (Read/Write)

    Configuration register is 0x2102
     
    srp336, Mar 14, 2006
    #23
  4. srp336

    Merv Guest

    The 2621's config-register setting looks a little odd - should usually
    be 0x2102 - you might want to reset at some point.
     
    Merv, Mar 14, 2006
    #24
  5. srp336

    Merv Guest

    There are a couple of bugs that might affect your 2621

    CSCdu06930 Multilink interface flapping
    CSCdv45416 Large packets fails when using PPP Multilink

    You might want to upgrade to a suitable 12.2 image
     
    Merv, Mar 14, 2006
    #25
  6. srp336

    srp336 Guest

    OK... I'll try that.

    Thanks!
     
    srp336, Mar 14, 2006
    #26
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.