Multiple users connecting to 506e behind NAT

Discussion in 'Cisco' started by UltyGodc, Jun 22, 2005.

  1. UltyGodc

    UltyGodc Guest

    I have been searching for some information on a problem with my VPN.

    When I have users at a hotel in behind the hotel's NATted internal
    network, I can only have one of those users able to connect to my 506e
    pix at anytime. When a new person connects, they grab the address of
    the previous user even if the ip ranges are different per group.

    What I need to know is can the 506e handle multiple connections from
    behind the same NATted address? If yes, then what versions of Client
    and Pix do I need to allow it? Any direction to guiding articles or
    instruction manuals would be appreciated. Heck, I'd go buy a 506e for
    Dummies book if it existed.

    Thanks in Advance.
     
    UltyGodc, Jun 22, 2005
    #1
    1. Advertisements

  2. I believe that you need "isakmp nat-traversal". This feature came
    with PIX OS version 6.3. You can find more information from

    http://www.cisco.com/univercd/cc/td/doc/product/iaabu/pix/pix_sw/v_63/cmdref/gl.htm#wp1027312
     
    Jyri Korhonen, Jun 22, 2005
    #2
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.