Multiple ISPs, One Pix 515

Discussion in 'Cisco' started by Tiffany, Nov 7, 2005.

  1. Tiffany

    Tiffany Guest

    My customer has a Pix 515R with a DMZ Port. They have one T1 line that
    is getting a lot of useage and they want to add a second circuit from a
    seperate provider. Their plan was to route traffic from certain
    segments through the old and others throiugh the new.

    Originally they had planned on connecting the new circuit to the DMZ
    port of the PIX, however, I am not sure how to set up policy based
    routes in the PIX to redirect traffic for certain internal segments. (I
    could do it with a router no problem)

    1) Can this even be done in 6.3(4)? (if so how)
    2) Can it be done in 7.0 if we upgraded the RAM? (if so how)
    3) Is it a poor design?

    Thanks,
    Tiffany
     
    Tiffany, Nov 7, 2005
    #1
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.