multi-tenant/VLAN/PPTP

Discussion in 'Cisco' started by Tim Schultz, Aug 30, 2004.

  1. Tim Schultz

    Tim Schultz Guest

    I've got a client who's setup up a 2621XM (IOS ver. 12.3(6a) i think) with a
    Cisco VLAN-capable switch of some flavor. He's using this setup to give a
    multi-tenant office building the ability to share 1 T1 connection to the
    internet. Each VLAN/office has their own public NAT overload address, with a
    each also having a few public IP's available for static NATs/PATs.

    What I need to do is set up pptp for each VLAN and make sure that each
    username is assigned to the proper VLAN when they dial in, get the proper
    IP, and have access to only their own VLAN. Anybody have any ideas on this
    or config examples. Any help is much appreciated.
     
    Tim Schultz, Aug 30, 2004
    #1
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.