mrtg, snmp and cisco C2924 resets

Discussion in 'Cisco' started by =?ISO-8859-2?Q?Pawe=B3_Go=B3aszewski?=, Oct 31, 2003.

  1. =?ISO-8859-2?Q?Pawe=B3_Go=B3aszewski?=

    =?ISO-8859-2?Q?Pawe=B3_Go=B3aszewski?= Guest

    I'm making traffic stats with mrtg, but on some C2924 I get soft reset
    on this sequence:
    cfgmaker --ifdesc=alias --ifref=name --snmp-options=:::::2 [email protected]

    mrtg-2.9.25
    cisco WS-C2924M-XL (PowerPC403GA) processor (revision 0x11)

    The interesting thing is that it happens only on some switches. IOS
    versions are the same.


    Anyone has the same problem? any solutions?
     
    =?ISO-8859-2?Q?Pawe=B3_Go=B3aszewski?=, Oct 31, 2003
    #1

    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. SNMP - Cisco - SNMP

  2. Dead Cicso Catalyst WS-C2924-XL-EN

  3. 6500 CatOs command sh port mac util and MRTG/SNMP values

  4. MRTG (SNMP) through a PIX

  5. Hang internal network traffic on Cisco Catalyst C2924-XL.

  6. Tracking VPNs via SNMP on ASA5510 MRTG

  7. Excessive interface resets on Cisco 1841 and FIOS line

  8. C2924 and Multiple VLANs

Loading...