MRTG PIX

Discussion in 'Cisco' started by Fredrik, Dec 14, 2004.

  1. Fredrik

    Fredrik Guest

    Hello
    Anyoneone got MRTG to get memory use on CISCO PIX (501 ver 6.3.3)?
    If you do please paste the config / OID.
    Thanx :)
     
    Fredrik, Dec 14, 2004
    #1
    1. Advertisements

  2. :Anyoneone got MRTG to get memory use on CISCO PIX (501 ver 6.3.3)?
    :If you do please paste the config / OID.

    enterprises.9.9.147.1.2.2 is the tree.

    enterprises.9.9.147.1.2.2.1.1.3 contains text strings describing
    what each memory object represents, and the actual gauge is
    the same OID but in enterprises.9.9.147.1.2.2.1.1.4 .

    For example,

    enterprises.9.9.147.1.2.2.1.1.3.2560.5 = "fewest 2560 byte blocks available since system startup"
    enterprises.9.9.147.1.2.2.1.1.4.2560.5 = Gauge32: 190
     
    Walter Roberson, Dec 14, 2004
    #2
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.