Modify OSPF default metric learned from BGP

Discussion in 'Cisco' started by response3, Apr 23, 2007.

  1. response3

    response3 Guest

    Hi all. I have two WAN connections, one terminated with a 2811 and
    the other with a PIX. I am redistributing the default route into
    OSPF. On the 2811, the default route is being learned via BGP. How
    can I adjust this BGP-redistributed route to be preferred over the
    route via the PIX? When I do a show ip ospf database, both routes are
    in the table, but the devices are choosing the closest path out.
    (Default OSPF behavior.) When I do a show route from several
    switches, the administrative distance and metrics are equal for these
    routes. Any help would be appreciated. Thanks.
     
    response3, Apr 23, 2007
    #1

    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. automatic default route propagation into RIP: default metric

  2. Redistribute static to OSPF, overriding the slower OSPF-native route?

  3. BGP - metric

  4. How OSPF metric?

  5. modifying route metric with ospf

  6. Change/Modify Default Search Engine

  7. basic/weird ospf question- ospf gurus need help!!!

  8. BGP static route from ISP and redistribute into OSPF

Loading...