MN-700 Base Station - adding a signal booster or antenna

Discussion in 'Wireless Networking' started by Guest, Mar 16, 2005.

  1. Guest

    Guest Guest

    In my home network, I have a few dead and weak spots on my wireless network,
    and I wanted to add a booster antenna or signal booster such as a couple
    offered by Hawking. The problem is, unlike some of the other wireless base
    stations, this antenna seems to be permanently attached and does not unscrew.
    Is there workaround for this, or will the antenna come off? Failing that, if
    I take it apart, is it easy to remove the old antenna and solder a new jack
    on that would accept a new antenna?
     
    Guest, Mar 16, 2005
    #1

    1. Advertisements

  2. Guest

    Jeff Baziuk [MSFT] Guest

    The antenna doesn't screw off and we don't support manually disassembling
    our hardware and trying to put additional components onto them.

    --
    Jeff Baziuk
    Microsoft Corporation

    This posting is provided "AS IS" with no warranties,
    and confers no rights.
     
    Jeff Baziuk [MSFT], Mar 17, 2005
    #2

    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Cannot update the mocrosoft Base Station mn-700

  2. MN-500 to MN-700 base station problems

  3. How to extend the range of my MN-700 Base Station

  4. Which antenna best for panel antenna

  5. MN-700 Base Station Challenge

  6. Wireless antenna booster

  7. mn-700 wireless base station

  8. Any experience with Woosh and booster antenna

Loading...