MN-100 router to DSL modem communication problem

Discussion in 'Broadband Hardware' started by RickO, Nov 3, 2007.

  1. RickO

    RickO Guest

    After several months with no problems, today my MS Broadband 10/100 Wired
    Base Station (MN-100) decided not to communicate with my DSL modem. I can
    ping the router (192.168.0.1) and other PC's, so network appears ok. If I
    connect the PC directly to the DSL modem, I can connect to the Internet, but
    not going through the router. I have powered-on and off all devices and
    rebooted several times. TCP/IP is set to obtain an IP address automatically;
    same with DNS.

    On one PC, I can use a VPN client+IE to get to the Internet.

    Any ideas much appreciated.
     
    RickO, Nov 3, 2007
    #1
    1. Advertisements

  2. RickO

    Barb Bowman Guest

    If a full factory reset using a paper clip and the reset hole does
    not fix this, it is time to throw out this discontinued old router
    and purchase a new one.

    --

    Barb Bowman
    MS Windows-MVP
    http://www.microsoft.com/windowsxp/expertzone/meetexperts/bowman.mspx
    http://blogs.digitalmediaphile.com/barb/
     
    Barb Bowman, Nov 3, 2007
    #2
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.