Mitel 3300

Discussion in 'UK VOIP' started by Ralph123, Jun 18, 2010.

  1. Ralph123

    Ralph123

    Joined:
    Jun 18, 2010
    Messages:
    1
    Likes Received:
    0
    Can anyone tell me how to setup a Mitel 3300 ICP PABX system to emit a "#" signal on hangup. This system is hooked up to a announcing system and if someone doesn't press "#" before hanging up the phone it messes up.

    I know how to login to the system and get to the configuration menus and everything but I can find any option or configuration like this.

    Thanks,
    Ralph
     
    Ralph123, Jun 18, 2010
    #1

    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Mitel 3300 and Cisco netowork best practices...

  2. Mitel 3300 weekly reboot... Is it necessary?

  3. Fax to the desktop solutions to integrate with Mitel 3300

  4. Mitel IP Trunking on the 3300

  5. Mitel 3300 MX Controller - anyone here use them?

  6. MITEL 3300 SIP TRUNK TO OCS 2007

  7. Mitel 3300 changing DHCP servers

  8. mitel 3300 voip system HARD RESET

Loading...