'max-redirects'

Discussion in 'Cisco' started by A Dickson, Feb 15, 2006.

  1. A Dickson

    A Dickson Guest

    Hey guys, I'm having trouble with a Cisco 3810 VoIP that is dependant
    on the default ISDN 'max-redirects' set at one. I've seen the command
    'max-redirects' in a few configuration examples in the dial-peer
    section however my 3810 doesn't have that option. I've looked
    _everywhere_ and there's nowhere I can find to set the ISDN redirection
    flag to something higher then 1 (ps I've tried with IOS12.3(9D) AND
    IOS12.3(6a)). If anybody could help me out that would be *wonderful*.
    My outbound calls are getting squashed because they have to go through
    a PBX before they get to the PSTN so I _must_ set the redirection
    higher. I can also see the max-redirects is at one though the 'show
    dialpeer ....'



    Thanks
    Adam
     
    A Dickson, Feb 15, 2006
    #1
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.