Making bluetooth discoverable problem

Discussion in 'Hardware' started by binoms, Nov 12, 2006.

  1. binoms

    binoms

    Joined:
    Nov 12, 2006
    Messages:
    2
    Likes Received:
    0
    I'm having problems in making my pre-installed bluetooth discoverable with my Acer 8204. I have enabled, checked the bluetooth drivers and hardware and still get the same problem. I get an error message saying:

    'An error occured while Windows was saving your settings. The following settings were not saved.

    Discoverability settings
    Connection settings'

    Under my Bluetooth device settings in Device Manager, I have Bluetooth Bus Enumerator and Broadcom 2045 Bluetooth 2.0 USB Device. These are working properly according to my Acer laptop.

    Could someone help me out on how to fix this problem?
     
    binoms, Nov 12, 2006
    #1
    1. Advertisements

  2. binoms

    bigal

    Joined:
    Jul 1, 2005
    Messages:
    1,485
    Likes Received:
    1
    Location:
    Northern Virginia, USA
    Make sure you have administrator rights when performing those changes. If that checks out, look on Acer's website for some FAQ section or e-mail them directly.
     
    bigal, Nov 13, 2006
    #2
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.