machines in VLAN not able to access internet

Discussion in 'Cisco' started by steve_sc33, Jul 19, 2005.

  1. steve_sc33

    steve_sc33 Guest

    I just recently purchased a cisco 1841 router. I have a DSL line with
    static IP address. I setup eth1 to connect to the DSL modem and eth0
    is setup with IP 10.10.10.1 (factory default). I also configured VLAN1
    to handle 192.168.1.1/24.

    When I test, I can get 2 machines within VLAN1 to see ping each other
    and they can also ping the static IP, 192.168.1.1. But, non of them
    are able to connect to the internet. Am I missing something here?
    Maybe a static route? but static route from where to where? Can
    someone help?

    Thanks in advance.
    Steve_sc33
     
    steve_sc33, Jul 19, 2005
    #1
    1. Advertisements

  2. steve_sc33

    Wayne Guest

    Just a guess, but you didn't configure NAT? Post your config with any
    public IP's and any passwords X'd out.
     
    Wayne, Jul 20, 2005
    #2
    1. Advertisements

  3. steve_sc33

    blackice Guest

    Do you have a default route configured?
     
    blackice, Jul 20, 2005
    #3
  4. steve_sc33

    steve_sc33 Guest

    Yes, you are right, I did not configure default route. It's working
    now.

    Thanks
    Steve_sc33
     
    steve_sc33, Jul 21, 2005
    #4
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.