MAC Authentication using RADIUS

Discussion in 'Cisco' started by Linuxian, May 16, 2006.

  1. Linuxian

    Linuxian

    Joined:
    May 16, 2006
    Messages:
    3
    Likes Received:
    0
    I want to use MAC authentication for clients that do not support 802.1X. I'd like to use the RADIUS server to do the authentication. I'm not sure how to configure the switch port for MAC auth so that it talks to the RADIUS server to validate the MAC. Can someone help me out with either a couple of tips or a link to some white papers on the subject?
     
    Linuxian, May 16, 2006
    #1

    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Wireless Access Point with Radius Server > authentication?

  2. RADIUS Server that Forces User *and* Computer Authentication?

  3. Microsoft IAS Patch to Correct Very Slow RADIUS/802.1X Authentication?

  4. Using RADIUS for authentication on WS-C3524-XL (C3500XL-C3H2S-M), Version 12.0(5.2)XU

  5. Cisco radius attributes with Funk Steel-Belted Radius Server

  6. Radius mac authentication

  7. Login authentication to Nortel switch using Cisco ACS v3.3 Radius

  8. Setup Wireless Network using Win2K Radius Authentication

Loading...