Losing network connection constantly

Discussion in 'Broadband Hardware' started by JT, Jul 18, 2009.

  1. JT

    JT Guest

    I am running windows xp pro 64 bit - connected to a linksys wired router, I
    have 3 computers running thru this router....

    about daily, I lose the net connection, I have tried to go into the net
    connection window and tried to repair the connection.. I have got to the CMD
    window and tried to release and renew the IP, but it just doesnt work.... the
    only way to get back on the net is to reboot my computer....

    the other two compters are running windows xp 32 bit versions and dont have
    a problem ....

    im with charter communications and on a 10 meg connection....

    its getting to the point about every few hours I have to reboot....

    any ideas on this? if you need more info, let me know..

    im just a rookie when it comes to the internet settings etc....

    JT, Jul 18, 2009
    1. Advertisements

  2. JT

    Barb Bowman Guest

    this group is actually for the now discontinued Microsoft branded
    networking hardware and you should post in one of the networking

    That said, you should

    1. look for newer drivers for your wired NIC card
    2. look for newer firmware for your Linksys router (you don't say
    which one)
    3. set the lease time higher on the Linksys router.

    1 & 2 are likely places to look

    if this does not help, please post in one of the networking
    newsgroups and give full specifics of your NIC/driver -
    router/firmware and what you have tried so far.

    Barb Bowman
    Barb Bowman, Jul 19, 2009
    1. Advertisements

  3. JT

    Toyota2009 Guest

    Revisit the capacity of your disk space. This may help. Look for pop ups
    as a reminder.
    Toyota2009, Sep 15, 2009
  4. JT

    Toyota2009 Guest

    Toyota2009, Sep 15, 2009
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.