Login authentication to Nortel switch using Cisco ACS v3.3 Radius

Discussion in 'Cisco' started by Orion, Apr 3, 2006.

  1. Orion

    Orion Guest

    Hi,

    We have a Nortel BayStack 470 switch configured with Radius
    authentication. We also have a Cisco ACS version 3.3 server which works
    as a Radius & TACACS+ server.

    Now when we press <Cntrl> + <Y> to log in to the Nortel switch, it asks
    for a username and password. However, when we type in the correct
    username and password it says "Access Denied from RADIUS". However,
    when we check the Cisco ACS server logs, it appears that the user has
    been sucessfully authenticated by the server, but we are unable to log
    into the Nortel switch.

    Please help.

    Thanks.
     
    Orion, Apr 3, 2006
    #1

    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Using RADIUS for authentication on WS-C3524-XL (C3500XL-C3H2S-M), Version 12.0(5.2)XU

  2. Cisco ACS versus Microsoft IAS for Radius ?

  3. Cisco PIX / CS ACS: Downloadable RADIUS ACLs vulnerability

  4. Setup Wireless Network using Win2K Radius Authentication

  5. Radius Vendor ID on Cisco Secure ACS

  6. We are buying: Cisco ADC Nortel Nokia Nortel Fujitsu Lucent

  7. Cannot login from ACS Admin -Cisco ACS 3.1

  8. ASA 55xx login by ACS (TACACS/RADIUS)

Loading...