linksys 3102 settings

Discussion in 'VOIP' started by abc121264, Jun 19, 2012.

  1. abc121264

    abc121264

    Joined:
    Jun 19, 2012
    Messages:
    1
    Likes Received:
    0
    I'm using Linksys SPA-3102 ... I registered with callcentric for free account and made all the settings they mentioned in there site .... the device registered with there site and everything is going fine as expected
    I can recieve calles on my callcentric No (VOIP) and also on my traditional land line which I've connected to the SPA-3102.
    The problem happen when I tried to use the phone to make call from my land line. Everytime I dial it uses the VOIP line1 to send tha call. What settings should I do to make the PSTN line the default dialing out line OR what code should I dial before my no to send the call to the PSTN line not to Line1.
     
    abc121264, Jun 19, 2012
    #1

    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. [Axon PBX] Configuring the Linksys SPA-3102?

  2. [Linksys 3102] Care to share a working config?

  3. [Linksys 3102 + GrandSteam IP phone] Direct outgoing IP call?

  4. [Linksys 3102] Call group through VoIP?

  5. [Linksys 3102/Axon PBX] Rewriting CID on the fly?

  6. Increase Volume On A Linksys SPA-3102

  7. Linksys 3102 connections?

  8. Q: Voice Quality Linksys SPA-3102

Loading...