LAN2LAN and Client VPN to PIX

Discussion in 'Cisco' started by Frank Fegert, Sep 2, 2004.

  1. Frank Fegert

    Frank Fegert Guest


    i'm struggling with a PIX 6.3(3) which has LAN2LAN VPNs (from
    VPN3000 and other PIXen) terminating and should be configured
    to accept software client VPN connections.
    The clients (4.02c) are able to connect successfully, but a
    "sh crypto ipsec" doesn't show any encap or decap packets.
    The client statistics show encap but no decap packets.
    I have a client-to-PIX alone setup running in my lab without
    any problems. So my question would be if it is possible to
    run LAN2LAN _and_ client VPNs against a PIX or only on at a


    Frank Fegert, Sep 2, 2004
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.