Keypadlinc home automation controller interferes with homeplug powerline network!

Discussion in 'Computer Support' started by mike2711, Nov 15, 2005.

  1. mike2711

    mike2711 Guest

    I have a homeplug ethernet powerline network
    (http://www.gigafast.com/products/product_detail/PE902-EBx.htm) linking
    my computers together that has always been reliable. It operates at a
    different frequency than X10 home automation signals. I just installed
    a Keypadlinc
    (12073W), which is a wall controller and it killed the network. I tried
    disabling the "boosterlinc"
    feature and it didn't help! I grabbed an extension cord and plugged the
    homeplug ethernet bridge into a different outlet on same cicuit, still
    won't work! I then tried plugging it into a different circuit and it
    works. Is there any fix or do I need to bite the bullet and go
    wireless??
     
    mike2711, Nov 15, 2005
    #1
    1. Advertisements

  2. Err ... use an extension cord to another circuit?
     
    =?ISO-8859-1?Q?R=F4g=EAr?=, Nov 15, 2005
    #2
    1. Advertisements

  3. mike2711

    Mitch Guest

    I doubt there is anything you can do. If these two technologies
    conflict with each other, then you simply can't use them together.
     
    Mitch, Nov 15, 2005
    #3
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.