Keeping alive ISDN 128k to ISP

Discussion in 'Cisco' started by Mr Sanghez, Jul 6, 2003.

  1. Mr Sanghez

    Mr Sanghez Guest

    Hi,

    I've just installed a Cisco 801 with a bridged real IP multilink 128k ISDN
    connection to Demon Internet in the UK. The connection drops every 5
    minutes or so. What I would like to do is keep both ISDN channels up for as
    long as possible.

    Ideally I would like to also make it redial the connection automatically
    should it disconnect as well. I have tried a keep alive util on a server
    but its not really working.

    If anyone could supply me with a dialler profile or advice on how to do this
    properly, I'd be greatul.

    Yours Hopefully

    Miguel
     
    Mr Sanghez, Jul 6, 2003
    #1

    1. Advertisements

  2. Mr Sanghez

    Ronald de Leeuw Guest

    Use the command 'dialer persistent' on your dialer interface.

    Ronald de Leeuw
     
    Ronald de Leeuw, Jul 6, 2003
    #2

    1. Advertisements

  3. Mr Sanghez

    Mr Sanghez Guest

    Thanks mate ;-)
     
    Mr Sanghez, Jul 6, 2003
    #3

    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Can you have failover to ISDN in a bridging environment with a standalone ISDN box?

  2. 64k instead of 128k

  3. Ip phones - enhanced 128k AAC-LD quality

  4. cisco 1721 triangle whit 2 cisco 800 over isdn 128k

  5. Which is better; DSL or 128k Cable?

  6. pc with isdn modem not connecte isdn 1841 router with isdn module

  7. 128k to 256k "Upgrade"

  8. anyone have speeds issues 256k / 128k

Loading...