Juniper Netscreen: Port forwarding for several IP addresses

Discussion in 'Network Routers' started by J. Schroeder, Nov 6, 2006.

  1. J. Schroeder

    J. Schroeder Guest

    Hi there,

    I want to configure a Netscreen 5GT for a /28 IP subnet. The netscreen
    should accept all IP adresse of the subnet and should forward different
    ports to internal IP adresses. Here is my idea: I configure the untrust
    interface with the subnet, e.g., the untrust interface of
    the Netscreen should use Now the IP adresse
    till should also accepted by the Netscreen. Is it porssible
    to use VIP for forwarding the same port to different internal IP
    addresses? What I want to do is: Port 80 of IP should be
    forwarded to the internal, Port 80 of IP should
    be forwarded to the internal IP and so on. address. Could
    anyone tell me if my idea is right and should work the way I want?

    Thank you!
    J. Schroeder, Nov 6, 2006
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.