ISG: volume based quota

Discussion in 'Cisco' started by Pavel Crasotin2147483647, Apr 7, 2006.

  1. Hi all.

    I'm trying to specifiy a volume based quota on ISG IOS for PPTP user.
    Volume and time quotas are defined in RADIUS profile. I see its applied to
    the session.
    But it seems quota does not work. No events or radius packets are generated
    when any quota is over.
    Can anyone help me to understand what I do wrong?

    ISG is
    Cisco IOS Software, 7301 Software (C7301-JS-M), Version 12.2(28)SB, RELEASE
    SOFTWARE (fc2)

    Here is config excerption and RADIUS profile

    subscriber feature prepaid prepaid-conf
    threshold time 5 seconds
    threshold volume 15000 bytes
    interim-interval 1 minutes
    method-list author PPTP_AAA
    method-list accounting PPTP_AAA
    password cisco
    !
    vpdn-group PPTP_G1
    ! Default PPTP VPDN group
    accept-dialin
    protocol pptp
    virtual-template 1
    local name N41-BRAS0
    !
    interface Virtual-Template1
    ip unnumbered Loopback0
    ip verify unicast source reachable-via rx
    no ip unreachables
    no peer default ip address
    ppp max-bad-auth 3
    ppp mtu adaptive
    ppp authentication chap pap PPTP_AAA
    ppp authorization PPTP_AAA
    ppp accounting PPTP_AAA

    RADIUS:
    pppuser Password = "cisco"
    Service-Type = Framed-User,
    Framed-Protocol = PPP,
    Cisco-Avpair = "ip:addr-pool=Client",
    Account-Info = "Aprepaid",
    Service-Info = "QD;256000;48000;96000;U;256000;48000;96000",
    Idle-Timeout = 300
    prepaid Password = "cisco", Service-Type = Outbound-User
    Cisco-Avpair = "ip:traffic-class=in access-group 100",
    Cisco-Avpair = "ip:traffic-class=out access-group 100",
    Cisco-Avpair = "prepaid-config=prepaid-conf",
    Control-Info = "QT60",
    Control-Info = "QV1024000"

    Thanx in advance.
    Pavel.
     
    Pavel Crasotin2147483647, Apr 7, 2006
    #1
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.