ISDN connection keep getting disconnected after 20sec?

Discussion in 'Cisco' started by lAwBoY, May 13, 2008.

  1. lAwBoY

    lAwBoY

    Joined:
    Aug 16, 2006
    Messages:
    15
    Likes Received:
    0
    < Show log >
    May 12 23:13:59 GMT: %ISDN-6-CONNECT: Interface Serial1/0:30 is now connected to 02230615026 N/A
    May 12 23:14:19 GMT: %ISDN-6-DISCONNECT: Interface Serial1/0:30 disconnected from 02230615026 , call lasted 20 seconds
    May 12 23:14:19 GMT: %LINK-3-UPDOWN: Interface Serial1/0:30, changed state to down
    May 12 23:14:19 GMT: %DIALER-6-UNBIND: Interface Se1/0:30 unbound from profile Di1
    May 12 23:14:29 GMT: %LINK-3-UPDOWN: Interface Serial1/0:30, changed state to up
    May 12 23:14:29 GMT: %DIALER-6-BIND: Interface Se1/0:30 bound to profile Di1

    =====================
     
    lAwBoY, May 13, 2008
    #1
    1. Advertisements

  2. lAwBoY

    lAwBoY

    Joined:
    Aug 16, 2006
    Messages:
    15
    Likes Received:
    0
    INJAISAN-2-A-2621#debug isdn q921
    debug isdn q921 is ON.
    INJAISAN-2-A-2621#

    May 12 21:05:03 GMT: %ISDN-6-DISCONNECT: Interface Serial1/0:30 disconnected from 02230615026 , call lasted 20 seconds
    May 12 21:05:03 GMT: ISDN Se1/0:15 Q921: User TX -> INFO sapi=0 tei=0, ns=60 nr=65
    May 12 21:05:03 GMT: ISDN Se1/0:15 Q921: User RX <- RR sapi=0 tei=0 nr=61
    May 12 21:05:03 GMT: ISDN Se1/0:15 Q921: User RX <- INFO sapi=0 tei=0, ns=65 nr=61
    May 12 21:05:03 GMT: ISDN Se1/0:15 Q921: User TX -> RR sapi=0 tei=0 nr=66
    May 12 21:05:03 GMT: %LINK-3-UPDOWN: Interface Serial1/0:30, changed state to down
    May 12 21:05:03 GMT: %DIALER-6-UNBIND: Interface Se1/0:30 unbound from profile Di1
    May 12 21:05:03 GMT: ISDN Se1/0:15 Q921: User TX -> INFO sapi=0 tei=0, ns=61 nr=66
    May 12 21:05:03 GMT: ISDN Se1/0:15 Q921: User RX <- RR sapi=0 tei=0 nr=62
    May 12 21:05:12 GMT: ISDN Se1/0:15 Q921: User TX -> INFO sapi=0 tei=0, ns=62 nr=66
    May 12 21:05:12 GMT: ISDN Se1/0:15 Q921: User RX <- RR sapi=0 tei=0 nr=63
    May 12 21:05:12 GMT: ISDN Se1/0:15 Q921: User RX <- INFO sapi=0 tei=0, ns=66 nr=63
    May 12 21:05:12 GMT: ISDN Se1/0:15 Q921: User TX -> RR sapi=0 tei=0 nr=67
    May 12 21:05:13 GMT: ISDN Se1/0:15 Q921: User RX <- INFO sapi=0 tei=0, ns=67 nr=63
    May 12 21:05:13 GMT: ISDN Se1/0:15 Q921: User TX -> RR sapi=0 tei=0 nr=68
    May 12 21:05:13 GMT: ISDN Se1/0:15 Q921: User RX <- INFO sapi=0 tei=0, ns=68 nr=63
    May 12 21:05:13 GMT: ISDN Se1/0:15 Q921: User TX -> RR sapi=0 tei=0 nr=69
    May 12 21:05:13 GMT: %LINK-3-UPDOWN: Interface Serial1/0:30, changed state to up
    May 12 21:05:13 GMT: %DIALER-6-BIND: Interface Se1/0:30 bound to profile Di1
    May 12 21:05:13 GMT: %ISDN-6-CONNECT: Interface Serial1/0:30 is now connected to 02230615026 N/A
    May 12 21:05:13 GMT: ISDN Se1/0:15 Q921: User TX -> INFO sapi=0 tei=0, ns=63 nr=69
    May 12 21:05:13 GMT: ISDN Se1/0:15 Q921: User RX <- RR sapi=0 tei=0 nr=64
    May 12 21:05:23 GMT: ISDN Se1/0:15 Q921: User RX <- RRp sapi=0 tei=0 nr=64
    May 12 21:05:23 GMT: ISDN Se1/0:15 Q921: User TX -> RRf sapi=0 tei=0 nr=69
    May 12 21:05:33 GMT: ISDN Se1/0:15 Q921: User TX -> RRp sapi=0 tei=0 nr=69
    May 12 21:05:33 GMT: ISDN Se1/0:15 Q921: User RX <- RRf sapi=0 tei=0 nr=64
    May 12 21:05:33 GMT: %ISDN-6-DISCONNECT: Interface Serial1/0:30 disconnected from 02230615026 , call lasted 20 seconds




    INJAISAN-2-A-2621#debug isdn q93
    May 12 21:06:33 GMT: %ISDN-6-DISCONNECT: Interface Serial1/0:30 disconnected from 02230615026 , call lasted 20 seconds
    May 12 21:06:33 GMT: ISDN Se1/0:15 Q931: TX -> DISCONNECT pd = 8 callref = 0x0052
    Cause i = 0x8090 - Normal call clearing
    May 12 21:06:33 GMT: ISDN Se1/0:15 Q931: RX <- RELEASE pd = 8 callref = 0x8052
    May 12 21:06:33 GMT: %LINK-3-UPDOWN: Interface Serial1/0:30, changed state to down
    May 12 21:06:33 GMT: %DIALER-6-UNBIND: Interface Se1/0:30 unbound from profile Di1
    May 12 21:06:33 GMT: ISDN Se1/0:15 Q931: TX -> RELEASE_COMP pd = 8 callref = 0x0052
    May 12 21:06:42 GMT: ISDN Se1/0:15 Q931: TX -> SETUP pd = 8 callref = 0x0053
    Bearer Capability i = 0x8890
    Standard = CCITT
    Transfer Capability = Unrestricted Digital
    Transfer Mode = Circuit
    Transfer Rate = 64 kbit/s
    Channel ID i = 0xA9839F
    Exclusive, Channel 31
    Called Party Number i = 0x81, '02230615026'
    Plan:ISDN, Type:Unknown
    May 12 21:06:42 GMT: ISDN Se1/0:15 Q931: RX <- SETUP_ACK pd = 8 callref = 0x8053
    Channel ID i = 0xA9839F
    Exclusive, Channel 31
    May 12 21:06:43 GMT: ISDN Se1/0:15 Q931: RX <- CALL_PROC pd = 8 callref = 0x8053
    Progress Ind i = 0x8A84 - Call has returned to the ISDN
    May 12 21:06:43 GMT: ISDN Se1/0:15 Q931: RX <- CONNECT pd = 8 callref = 0x8053
    Date/Time i = 0x08050D0224
    May 12 21:06:43 GMT: %LINK-3-UPDOWN: Interface Serial1/0:30, changed state to up
    May 12 21:06:43 GMT: %DIALER-6-BIND: Interface Se1/0:30 bound to profile Di1
    May 12 21:06:43 GMT: %ISDN-6-CONNECT: Interface Serial1/0:30 is now connected to 02230615026 N/A
    May 12 21:06:43 GMT: ISDN Se1/0:15 Q931: TX -> CONNECT_ACK pd = 8 callref = 0x0053
    May 12 21:07:03 GMT: %ISDN-6-DISCONNECT: Interface Serial1/0:30 disconnected from 02230615026 , call lasted 20 seconds



    INJAISAN-2-A-2621#debug isdn events
    May 12 21:08:03 GMT: %ISDN-6-DISCONNECT: Interface Serial1/0:30 disconnected from 02230615026 , call lasted 20 seconds
    May 12 21:08:03 GMT: ISDN Se1/0:15 EVENT: process_rxstate: ces/callid 1/0x80AC calltype 1 CALL_CLEARED
    May 12 21:08:03 GMT: %LINK-3-UPDOWN: Interface Serial1/0:30, changed state to down
    May 12 21:08:03 GMT: %DIALER-6-UNBIND: Interface Se1/0:30 unbound from profile Di1
    May 12 21:08:12 GMT: ISDN Se1/0:15 EVENT: UserIdle: callid 0x80AD received ISDN_CALL (0x0)
    May 12 21:08:12 GMT: ISDN Se1/0:15 EVENT: process_rxstate: ces/callid 1/0x80AD calltype 1 CALL_SETUP_ACK
    May 12 21:08:13 GMT: ISDN Se1/0:15 EVENT: process_rxstate: ces/callid 1/0x80AD calltype 1 CALL_PROCEEDING
    May 12 21:08:13 GMT: ISDN Se1/0:15 EVENT: process_rxstate: ces/callid 1/0x80AD calltype 1 CALL_CONNECT
    May 12 21:08:13 GMT: %LINK-3-UPDOWN: Interface Serial1/0:30, changed state to up
    May 12 21:08:13 GMT: %DIALER-6-BIND: Interface Se1/0:30 bound to profile Di1
    May 12 21:08:13 GMT: %ISDN-6-CONNECT: Interface Serial1/0:30 is now connected to 02230615026 N/A
    May 12 21:08:13 GMT: ISDN Se1/0:15 EVENT: process_rxstate: ces/callid 1/0x80AD calltype 1 CALL_PROGRESS
    May 12 21:08:33 GMT: ISDN Se1/0:15 EVENT: UserIdle: callid 0x80AD received ISDN_HANGUP (0x1)
    May 12 21:08:33 GMT: %ISDN-6-DISCONNECT: Interface Serial1/0:30 disconnected from 02230615026 , call lasted 20 seconds


    INJAISAN-2-A-2621#debug ppp authentication
    PPP authentication debugging is on
    INJAISAN-2-A-2621#
    May 12 21:09:33 GMT: %ISDN-6-DISCONNECT: Interface Serial1/0:30 disconnected from 02230615026 , call lasted 20 seconds
    May 12 21:09:33 GMT: %LINK-3-UPDOWN: Interface Serial1/0:30, changed state to down
    May 12 21:09:33 GMT: %DIALER-6-UNBIND: Interface Se1/0:30 unbound from profile Di1
    May 12 21:09:43 GMT: %LINK-3-UPDOWN: Interface Serial1/0:30, changed state to up
    May 12 21:09:43 GMT: %DIALER-6-BIND: Interface Se1/0:30 bound to profile Di1
    May 12 21:09:43 GMT: %ISDN-6-CONNECT: Interface Serial1/0:30 is now connected to 02230615026 N/A
    May 12 21:09:43 GMT: Se1/0:30 PPP: Using dialer call direction
    May 12 21:09:43 GMT: Se1/0:30 PPP: Treating connection as a callout
    May 12 21:09:43 GMT: Se1/0:30 PPP: Authorization NOT required
    May 12 21:10:03 GMT: %ISDN-6-DISCONNECT: Interface Serial1/0:30 disconnected from 02230615026 , call lasted 20 seconds
     
    lAwBoY, May 13, 2008
    #2
    1. Advertisements

  3. lAwBoY

    lAwBoY

    Joined:
    Aug 16, 2006
    Messages:
    15
    Likes Received:
    0
    %ISDN-6-CONNECT: Interface Serial1/0:30 is now connected to 02230615026 N/A


    anyone one know why it is showing N/A instead of the remote ISDN catcher im dialing to?
     
    lAwBoY, May 13, 2008
    #3
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.