IPV6 address configuration

Discussion in 'Cisco' started by kapownik, Mar 6, 2013.

  1. kapownik

    kapownik Guest

    With a command...

    R1(config-if)#ipv6 address 2001:5c0:1400:a::331/64 eui-64

    ....one can configure an address for an interface with EUI-64 part
    generated from actual MAC address on this interface.

    How to make router to generate EUI-64 with random numbers, without
    revealing actual MAC address and if possible last 64 bits of
    IPv6-address are randomly changed from time to time ?
     
    kapownik, Mar 6, 2013
    #1

    1. Advertisements

  2. kapownik

    Lutz Donnerhacke Guest

    Run a script periodically which does:
    (conf-if)# ipv6 address fe80::ran:dom:hex:tets link-local

    And you are fine.

    Please keep in mind, that this will change the SLAAC adresses while keep the
    reachablilty of the old ones fow a while.

    Don't forget to update your DNS, your firewalls, and all your systems
    manually configured to use the router IP.
     
    Lutz Donnerhacke, Mar 8, 2013
    #2

    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. ipv6 - which source address to use?

  2. ipv6 / 128bit crypto

  3. IPv6 source routing, how to, it doesn't work IMO

  4. About new Cisco router ipv6

  5. PEAP Configuration Woes - PEAP configuration help

  6. Configuration reverted to previous configuration after power loss

  7. DHCP Configuration - Relay Agent - IP Address Assignment

  8. Ipv6 Configuration!!!

Loading...